Saturday, January 4, 2014

CCNA Security Final exam answers - 2014

1. When logging is enabled for an ACL entry, how does the router switch packets filtered by the ACL?


topology-based switching


autonomous switching

>> 
process switching


optimum switching



2. Which statement is true about the One-Step lockdown feature of the CCP Security Audit wizard?


It enables the Secure Copy Protocol (SCP).


It supports AAA configuration.


It enables TCP intercepts.

>> 
It sets an access class ACL on vty lines.


It provides an option for configuring SNMPv3 on all routers.

3. What are three common examples of AAA implementation on Cisco routers? (Choose three.)

>> 
authenticating administrator access to the router console port, auxiliary port, and vty ports

>> 
authenticating remote users who are accessing the corporate LAN through IPsec VPN connections


implementing public key infrastructure to authenticate and authorize IPsec VPN peers using digital certificates

>> 
implementing command authorization with TACACS+


securing the router by locking down all unused services


tracking Cisco Netflow accounting statistics




4. Refer to the exhibit. The administrator can ping the S0/0/1 interface of RouterB but is unable to gain Telnet access to the router using the password cisco123. What is a possible cause of the problem?


The Telnet connection between RouterA and RouterB is not working correctly.

>> 
The password cisco123 is wrong.


The enable password and the Telnet password need to be the same.


The administrator does not have enough rights on the PC that is being used.



5. Refer to the exhibit. An administrator has entered the commands that are shown on router R1. At what trap level is the logging function set?


2

>> 
3


5


6



6. If a switch is configured with the storm-control command and the action shutdown and action trap parameters, which two actions does the switch take when a storm occurs on a port? (Choose two.)

>> 
The port is disabled.


The switch is rebooted.

>> 
An SNMP log message is sent.


The port is placed in a blocking state.


The switch forwards control traffic only.



7. Why does a worm poses a greater threat than a virus poses?


Worms run within a host program.


Worms are not detected by antivirus programs.


Worms directly attack the network devices.

>> 
Worms are more network-based than viruses are.



8. When port security is enabled on a Cisco Catalyst switch, what is the default action when the maximum number of allowed MAC addresses is exceeded?


The violation mode for the port is set to restrict.


The MAC address table is cleared, and the new MAC address is entered into the table.


The port remains enabled, but the bandwidth is throttled until the old MAC addresses are aged out.

>> 
The port is shut down.



9. Which type of encryption algorithm uses public and private keys to provide authentication, integrity, and confidentiality?


IPsec


symmetric

>> 
asymmetric


shared secret



10. Which three statements describe the IPsec protocol framework? (Choose three.)

>> 
AH uses IP protocol 51.


AH provides encryption and integrity.

>> 
AH provides integrity and authentication.


ESP uses UDP protocol 50.


ESP requires both authentication and encryption.

>> 
ESP provides encryption, authentication, and integrity.



11. Refer to the exhibit. Which interface configuration completes the CBAC configuration on router R1?





R1(config)# interface fa0/0
R1(config-if)# ip inspect INSIDE in
R1(config-if)# ip access-group OUTBOUND in





R1(config)# interface fa0/1
R1(config-if)# ip inspect INSIDE in
R1(config-if)# ip access-group OUTBOUND in





R1(config)# interface fa0/1
R1(config-if)# ip inspect OUTBOUND in
R1(config-if)# ip access-group INSIDE out





R1(config)# interface fa0/0
R1(config-if)# ip inspect OUTBOUND in
R1(config-if)# ip access-group INSIDE in




>> 
R1(config)# interface fa0/1
R1(config-if)# ip inspect OUTBOUND in
R1(config-if)# ip access-group INSIDE in



12. Which statement describes the operation of the IKE protocol?


It uses IPsec to establish the key exchange process.


It uses sophisticated hashing algorithms to transmit keys directly across a network.

>> 
It calculates shared keys based on the exchange of a series of data packets.


It uses TCP port 50 to exchange IKE information between the security gateways.



13. Which two configuration requirements are needed for remote access VPNs using Cisco Easy VPN Server, but are not required for site-to-site VPNs? (Choose two.)

>> 
group policy lookup


IPsec translations

>> 
virtual template interface


IKE policies


transform sets



14. What can be used as a VPN gateway when setting up a site-to-site VPN?


Cisco Catalyst switch

>> 
Cisco router


Cisco Unified Communications Manager


Cisco AnyConnect



15. Which type of Layer 2 attack makes a host appear as the root bridge for a LAN?


LAN storm


MAC address spoofing


MAC address table overflow

>> 
STP manipulation


VLAN attack



16. Refer to the exhibit. An administrator has configured a standard ACL on R1 and applied it to interface serial 0/0/0 in the outbound direction. What happens to traffic leaving interface serial 0/0/0 that does not match the configured ACL statements?


The resulting action is determined by the destination IP address.


The resulting action is determined by the destination IP address and port number.


The source IP address is checked and, if a match is not found, traffic is routed out interface serial 0/0/1.

>> 
The traffic is dropped.



17. The use of 3DES within the IPsec framework is an example of which of the five IPsec building blocks?


authentication

>> 
confidentiality


Diffie-Hellman


integrity


nonrepudiation



18. Refer to the exhibit. Which two statements are correct regarding the configuration on switch S1? (Choose two.)

>> 
Port Fa0/5 storm control for broadcasts will be activated if traffic exceeds 80.1 percent of the total bandwidth.


Port Fa0/6 storm control for multicasts and broadcasts will be activated if traffic exceeds 2,000,000 packets per second.

>> 
Port Fa0/6 storm control for multicasts will be activated if traffic exceeds 2,000,000 packets per second.


Port Fa0/5 storm control for multicasts will be activated if traffic exceeds 80.1 percent of the total bandwidth.


Port Fa0/5 storm control for broadcasts and multicasts will be activated if traffic exceeds 80.1 percent of 2,000,000 packets per second.



19. What is a characteristic of AAA accounting?


Accounting can only be enabled for network connections.


Users are not required to be authenticated before AAA accounting logs their activities on the network.

>> 
Possible triggers for the aaa accounting exec default command include start-stop and stop-only.


Accounting is concerned with allowing and disallowing authenticated users access to certain areas and programs on the network.
20. A network technician is configuring SNMPv3 and has set a security level of auth. What is the effect of this setting?


authenticates a packet using the SHA algorithm only


authenticates a packet by a string match of the username or community string

>> 
authenticates a packet by using either the HMAC with MD5 method or the SHA method


authenticates a packet by using either the HMAC MD5 or HMAC SHA algorithms and encrypts


the packet using either the DES, 3DES or AES algorithms



21. Which action best describes a MAC address spoofing attack?

>> 
altering the MAC address of an attacking host to match that of a legitimate host


bombarding a switch with fake source MAC addresses


forcing the election of a rogue root bridge


flooding the LAN with excessive traffic



22. When configuring a site-to-site IPsec VPN using the CLI, the authentication pre-share command is configured in the ISAKMP policy. Which additional peer authentication configuration is required?


Configure the message encryption algorithm with the encryptiontype ISAKMP policy


configuration command.


Configure the DH group identifier with the groupnumber ISAKMP policy configuration command.


Configure a hostname with the crypto isakmp identity hostname global configuration command.

>> 
Configure a PSK with the crypto isakmp key global configuration command.



23. Which three statements describe limitations in using privilege levels for assigning command authorization? (Choose three.)

>> 
There is no access control to specific interfaces on a router.


The root user must be assigned to each privilege level defined.

>> 
Commands set on a higher privilege level are not available for lower privileged users.


Views are required to define the CLI commands that each user can access.

>> 
Creating a user account that needs access to most but not all commands can be a tedious process.


It is required that all 16 privilege levels be defined, whether they are used or not.



24. Which set of Cisco IOS commands instructs the IPS to compile a signature category named ios_ips into memory and use it to scan traffic?


R1(config)# ip ips signature-category
R1(config-ips-category)# category all
R1(config-ips-category-action)# retired false




>> 
R1(config)# ip ips signature-category
R1(config-ips-category)# category ios_ips basic
R1(config-ips-category-action)# retired false





R1(config)# ip ips signature-category
R1(config-ips-category)# category all
R1(config-ips-category-action)# no retired false





R1(config)# ip ips signature-category
R1(config-ips-category)# category ios_ips basic
R1(config-ips-category-action)# no retired false



25. Refer to the exhibit. Which three things occur if a user attempts to log in four times within 10 seconds using an incorrect password? (Choose three.)

>> 
Subsequent virtual login attempts from the user are blocked for 60 seconds.


During the quiet mode, an administrator can virtually log in from any host on network 172.16.1.0/24.


Subsequent console login attempts are blocked for 60 seconds.

>> 
A message is generated indicating the username and source IP address of the user.

>> 
During the quiet mode, an administrator can log in from host 172.16.1.2.


No user can log in virtually from any host for 60 seconds.



26. Which statement describes configuring ACLs to control Telnet traffic destined to the router itself?


The ACL must be applied to each vty line individually.


The ACL is applied to the Telnet port with the ip access-group command.


Apply the ACL to the vty lines without the in or out option required when applying ACLs to interfaces.

>> 
The ACL should be applied to all vty lines in the in direction to prevent an unwanted user from connecting to an unsecured port.



27. What are three characteristics of the ASA routed mode? (Choose three.)


This mode does not support VPNs, QoS, or DHCP Relay.

>> 
The interfaces of the ASA separate Layer 3 networks and require different IP addresses in different subnets.

>> 
It is the traditional firewall deployment mode. 

>> 
NAT can be implemented between connected networks.


This mode is referred to as a “bump in the wire.


In this mode, the ASA is invisible to an attacker.



28. Which authentication method is available when specifying a method list for group policy lookup using the CCP Easy VPN Server wizard?


Active Directory


Kerberos


Certificate Authority

>> 
RADIUS


TACACS+



29. Which access list statement permits HTTP traffic that is sourced from host 10.1.129.100 port 4300 and destined to host 192.168.30.10?


access-list 101 permit tcp any eq 4300


access-list 101 permit tcp 192.168.30.10 0.0.0.0 eq 80 10.1.0.0 0.0.255.255


access-list 101 permit tcp 10.1.129.0 0.0.0.255 eq www 192.168.30.10 0.0.0.0 eq www

>> 
access-list 101 permit tcp 10.1.128.0 0.0.1.255 eq 4300 192.168.30.0 0.0.0.15 eq www


access-list 101 permit tcp host 192.168.30.10 eq 80 10.1.0.0 0.0.255.255 eq 4300



30. Refer to the exhibit. What conclusion can be drawn from the exhibited window when it is displayed on a remote user computer screen?


The user has connected to a secure web server.

>> 
The user has established a client-based VPN connection.


The user has logged out of the AnyConnect VPN client.


The user is installing the AnyConnect VPN client.


The user is using a web browser to connect to a clientless SSL VPN.



31. What will be disabled as a result of the no service password-recovery command?


aaa new-model global configuration command


changes to the configuration register


password encryption service

>> 
ability to access ROMmon



32. Which type of IPS signature detection is used to distract and confuse attackers?


pattern-based detection


anomaly-based detection


policy-based detection

>> 
honey pot-based detection



33. Refer to the exhibit. An administrator has configured router R1 as indicated. However, SDEE messages fail to log. Which solution corrects this problem?


Issue the logging on command in global configuration.

>> 
Issue the ip ips notify sdee command in global configuration.


Issue the ip audit notify log command in global configuration.


Issue the clear ip ips sdee events command to clear the SDEE buffer.



34. Which attack allows the attacker to see all frames on a broadcast network by causing a switch to flood all incoming traffic?


LAN storm


VLAN hopping


STP manipulation

>> 
MAC table overflow


802.1q double tagging



35. Refer to the exhibit. The indicated window has appeared in the web browser of a remote user. What is the cause of this message?


The user has timed out of an AnyConnect SSL VPN installation.

>> 
The user has logged out of a clientless SSL VPN session.


The user has logged out of a Cisco VPN Client session.


The user has logged out of an AnyConnect IPsec VPN session.


The user has logged out of an AnyConnect SSL VPN session.



36. An administrator has been asked to configure basic access security on a router, including creating secure passwords and disabling unattended connections. Which three actions accomplish this using recommended security practices? (Choose three.)


Create passwords with only alphanumeric characters.

>> 
Set the minimum password length to 10 characters.


Set the executive timeout parameters on the console port to 120 and 0.

>> 
Set the executive timeout parameters on the vty lines to 3 and 0.

>> 
Enable the password encryption service for the router.


Enable login using the Aux port with the executive timeout set to 0 and 0.



37. Which type of intrusion prevention technology is primarily used by Cisco IPS security appliances?


rule-based


profile-based

>> 
signature-based


NetFlow anomaly-based


protocol analysis-based



38. Which type of packets exiting the network of an organization should be blocked by an ACL?


packets that are not encrypted


packets that are not translated with NAT

>> 
packets with source IP addresses outside of the organization’s network address space


packets with destination IP addresses outside of the organization’s network address space



39. An administrator wants to prevent a rogue Layer 2 device from intercepting traffic from multiple VLANs on a network. Which two actions help mitigate this type of activity? (Choose two.)

>> 
Disable DTP on ports that require trunking.


Place unused active ports in an unused VLAN.


Secure the native VLAN, VLAN 1, with encryption.

>> 
Set the native VLAN on the trunk ports to an unused VLAN.


Turn off trunking on all trunk ports and manually configure each VLAN as required on each port.



40. Which command would an administrator use to clear generated crypto keys?


Router(config)# crypto key decrypt


Router(config-line)# transport input ssh clear


Router(config)# crypto key rsa

>> 
Router(config)# crypto key zeroize rsa



41. What occurs after RSA keys are generated on a Cisco router to prepare for secure device management?


All vty ports are automatically configured for SSH to provide secure management.


The general-purpose key size must be specified for authentication with the crypto key generate


rsa general-keys moduluscommand.


The keys must be zeroized to reset secure shell before configuring other parameters.

>> 
The generated keys can be used by SSH.



42. Refer to the exhibit. An administrator has configured an ASA 5505 as indicated but is still unable toping the inside interface from an inside host. What is the cause of this problem?


An IP address should be configured on the Ethernet 0/0 and 0/1 interfaces.

>> 
The no shutdown command should be entered on interface Ethernet 0/1.


The security level of the inside interface should be 0 and the outside interface should be 100.


VLAN 1 should be assigned to interface Ethernet 0/0 and VLAN 2 to Ethernet 0/1.


VLAN 1 should be the outside interface and VLAN 2 should be the inside interface.



43. Refer to the exhibit. An administrator is examining the message in a syslog server. What can be determined from the message?

>> 
This is a notification message for a normal but significant condition.


This is an alert message for which immediate action is needed.


This is an error message for which warning conditions exist.


This is an error message indicating the system is unusable.



44. What is a result of securing the Cisco IOS image using the Cisco IOS Resilient Configuration feature?

>> 
The Cisco IOS image file is not visible in the output of the show flash command.


The Cisco IOS image is encrypted and then automatically backed up to a TFTP server.


The Cisco IOS image is encrypted and then automatically backed up to the NVRAM.


When the router boots up, the Cisco IOS image is loaded from a secured FTP location.



45. Which two commands are needed on every IPv6 ACL to allow IPv6 neighbor discovery? (Choose two.)


permit tcp any any ack

>> 
permit icmp any any nd-na


permit icmp any any echo-reply

>> 
permit icmp any any nd-ns


permit ipv6 any any fragments


permit ipv6 any any routing



46. Which technology does CCP require for configuring remote access VPN support with the Easy VPN Server wizard?


AutoSecure


Role-Based CLI Access

>> 
AAA


port forwarding



47. What are three goals of a port scan attack? (Choose three.)


disable used ports and services

>> 
determine potential vulnerabilities

>> 
identify active services


identify peripheral configurations

>> 
identify operating systems


discover system passwords



48. Refer to the exhibit. An administrator is implementing VPN support on an ASA 5505. What type of VPN support is being implemented?


client-based IPsec VPN using Cisco VPN Client


client-based IPsec VPN using AnyConnect


client-based SSL VPN using AnyConnect


clientless IPsec VPN

>> 
clientless SSL VPN


site-to-site IPsec VPN



49. Which type of VPN may require the Cisco VPN Client software?

>> 
remote access VPN


SSL VPN


site-to-site VPN


MPLS VPN



50. Sales representatives of an organization use computers in hotel business centers to occasionally access corporate e-mail and the inventory database. What would be the best VPN solution to implement on an ASA to support these users?


client-based IPsec VPN using Cisco VPN Client


client-based IPsec VPN using AnyConnect


client-based SSL VPN using AnyConnect


clientless IPsec VPN using a web browser

>> 
clientless SSL VPN using a web browser


site-to-site IPsec VPN



51. Refer to the exhibit. What information can be obtained from the AAA configuration statements?

>> 
The authentication method list used for Telnet is named ACCESS.


The authentication method list used by the console port is named ACCESS.


The local database is checked first when authenticating console and Telnet access to the router.


If the TACACS+ AAA server is not available, no users can establish a Telnet session with the router.


If the TACACS+ AAA server is not available, console access to the router can be authenticated using the local database.



52. What must be configured before any Role-Based CLI views can be created?

>> 
aaa new-model command


multiple privilege levels


secret password for the root user


usernames and passwords



53. Refer to the exhibit. Based on the output from the show secure bootset command on router R1, which three conclusions can be drawn regarding Cisco IOS Resilience? (Choose three.)


A copy of the Cisco IOS image file has been made.

>> 
A copy of the router configuration file has been made.

>> 
The Cisco IOS image file is hidden and cannot be copied, modified, or deleted.


The Cisco IOS image filename will be listed when the show flash command is issued on R1.


The copy tftp flash command was issued on R1.

>> 
The secure boot-config command was issued on R1.



54. What are two disadvantages of using network IPS? (Choose two.)

>> 
Network IPS has a difficult time reconstructing fragmented traffic to determine if an attack was successful.

>> 
Network IPS is incapable of examining encrypted traffic.


Network IPS is operating system-dependent and must be customized for each platform.


Network IPS is unable to provide a clear indication of the extent to which the network is being attacked.


Network IPS sensors are difficult to deploy when new networks are added.



55. Which statement describes the CCP Security Audit wizard?


After the wizard identifies the vulnerabilities, the CCP One-Step Lockdown feature must be used to make all security-related configuration changes.


After the wizard identifies the vulnerabilities, it automatically makes all security-related configuration changes.


The wizard autosenses the inside trusted and outside untrusted interfaces to determine possible security problems that might exist.

>> 
The wizard is based on the Cisco IOS AutoSecure feature.


The wizard is enabled by using the Intrusion Prevention task.



56. Which three statements describe zone-based policy firewall rules that govern interface behavior and the traffic moving between zone member interfaces? (Choose three.)


An interface can be assigned to multiple security zones.


Interfaces can be assigned to a zone before the zone is created.

>> 
Pass, inspect, and drop options can only be applied between two zones.

>> 
If traffic is to flow between all interfaces in a router, each interface must be a member of a zone.


Traffic is implicitly prevented from flowing by default among interfaces that are members of the same zone.

>> 
To permit traffic to and from a zone member interface, a policy allowing or inspecting traffic must be configured between that zone and any other zone.



57. Refer to the exhibit. Which option tab on the CCP screen is used to view the Top Threats table and deploy signatures associated with those threats?


Create IPS


Edit IPS

>> 
Security Dashboard


IPS Sensor


IPS Migration



58. Which statement correctly describes a type of filtering firewall?


A transparent firewall is typically implemented on a PC or server with firewall software running on it.


A packet-filtering firewall expands the number of IP addresses available and hides network addressing design.


An application gateway firewall (proxy firewall) is typically implemented on a router to filter Layer 3 and Layer 4 information.

>> 
A stateful firewall monitors the state of connections, whether the connection is in an initiation, data transfer, or termination state.



59. Which component of AAA is used to determine which resources a user can access and which operations the user is allowed to perform?


auditing


accounting

>> 
authorization


authentication



60. Which three statements should be considered when applying ACLs to a Cisco router? (Choose three.)


Place generic ACL entries at the top of the ACL.

>> 
Place more specific ACL entries at the top of the ACL.

>> 
Router-generated packets pass through ACLs on the router without filtering.


ACLs always search for the most specific entry before taking any filtering action.


A maximum of three IP access lists can be assigned to an interface per direction (in or out).

>> 
An access list applied to any interface without a configured ACL allows all traffic to pass.







CCNA Security Final Answers

No comments:

Post a Comment